Thursday, January 7, 2010

What's the best oil to use in a Yamaha motorcycle?

A Yamaha 650cc V-Star.What's the best oil to use in a Yamaha motorcycle?
Sick-o-leen? Lucas? Yamalube?





Got to be friggin kidding me!





It's very important to read the labels today and whether you are under warranty. Read the manual - you may see it says something like ';API-SJ and JASO MA'; if you are under warranty and it states both then you better find one that says both - Mobil 1 4t racing oil exceeds both.





If warranty is not an issue I'd recommend Rotella that's not marked CJ-4 and marked CI-4





do not use API SL or SM, energy conserving, or anything with a starburst insignia on it





If you find API SL then only use it if it also meets the European ACEA A3/B3 standards as well or forget it





If you want motorcycle specific I recommend Mobil 1 4t, Motul, and Redline only! Use the viscosity that the manufacture recommends and avoid using 20-50 oil unless you ride in temps of 100 degrees or more consistently.





If you want something inexpensive then try the Rotella CI-4 or what's mostly the single most over-looked and Porsche approved engine oil on the market today - Kendall GT-1. Full synthetic Castrol is good too





If want something really exotic then order Brad Penn, Swepco, CMW, or Joe Gibbs racing oils





Rotella is actually a recommended break-in oil for air-cooled Porsche camshafts and rockers - that should speak volumes in regards to it's quality





In the future when an oil meets the ACEA A9 standards I'd grab some up. If money was no object then Motul or Redline





I base my findings on what engineers, race engine builders, and experts recommend - not opinions by users who are convinced a name brand is simply good based on no other support the.... ';I use it';





Sick-o-leen, Yamalube (who ever makes it for them), and Lucas don't qualify, don't compare, and all have a fall off that makes them inferior. Even AMSOIL has studies that show Yamalube to be one of the worst.... Sick-o-leen is notorious for having harmful additives, and Lucas? LMAO!





Also note this, if you use dino then don't change it frequently because it is now proven that frequently changing dino oil is more harmful then over-extending. It's because the detergent additives in dino are very corrosive and cause wear, use wears out these harmful detergents so it's better old then new..... some people will tell you that it doesn't matter what you use if you just change it frequently...WRONG!





I don't recommend AMSOIL for two personal reasons, aggressive marketing approach that attacks other brands and implying Spartan like change intervals of thousands of miles are good. Manufactures state when to change your oil on a general basis, this does not include times for hard use and extreme temps, which may require a change regardless of the mileage as a result, Shear effects by bearings and gears in your transmission effect the viscosity ability of all oils - and with motorcycles if you change within the periods or events as I have described above - you won't go wrong - motorcycles, air cooled motorcycles are hard on oil and AMSOIL is full of it in my book, you need to change it...





Try to use a premium oil filter with the highest level of filtering possible and a GM study shows that this will will extend engine life 75% on average - making the oil filter as important as the oil, if not more!What's the best oil to use in a Yamaha motorcycle?
As long as it does not say energy conserving on the API label you can use any, yes any car oil. There are quite a bit of descrepancies with the use of car oil vs. 'motorcycle oil' but I have been using nothing but car oil in my bikes for years and put many miles on them with absolutely no problems and I have many bikes of various brands and sizes. The motorcycle oil as the dealers like to call it is an expensive crock in my opinion and those using expensive oil and synthetics are jsut throwing their money away. 20,30,40 years ago there wasnt such a thing as 'motorcycle oil', synthetic etc. what did they do, they used car oil. Just keep it changed on a regular basis and you wont have any problems. Check out beacbums two websites.
Use the yamaha oil on the vstar for 3 reasons;


1) it costs about the same as non yamaha oil


2) it keeps the warranty safe


3) it is also used by the clutch, and if you use the wrong oil it will


cause slippage and other nasty problems.
The obvious choice would be Yama-lube found at any dealership.





Otherwise Lucas is a quality brand. Both are pretty costly but usually worth the peace of mind.





Most guys just use regular 10W40 and ignore the small risk of the clutch effects. I use it and don't have any issues.
Yamalube makes a great oil,but dont get into the oil hype,as long as it's broken in use fully synthetic oils without friction modifiers.


You can even go to you local walmart,autozone and pick up some rotella diesel oil works great.
If money is of no object I would recommend Silkolene. Although changing your oil when necessary, depending on how you ride is more important than having the best oil.
The best oil for your bike is the manufacturers recommended oil





Yamalube


It's what it was built to use.
Use a synthetic or synthetic blend.


Don't use car oil that's labeled, '; Energy Conserving'; in the API label.



this question will get many different answers, oil type all ways has many opinions. Read and follow what the manual has to say, that is your best bet.
Read this. Also go to drPiston.com and look around.
  • How do you add message boards to a website
  • Is motorcycle oil different than regular motor oil, and if so how? Thanks!?

    Add DrSmith's answer to KB's answer and you get the full story.





    Here is Mobil 1's answer to your question:





    ';Motorcycle oils and passenger car oils are very similar, with the exception of a couple of areas that are key to motorcycle operation. The first area concerns common sumps, or the use of motor oil, to lubricate and cool the transmission. As you know, in a passenger car the transmission is lubricated by an ATF fluid, which has frictional properties required for transmission operation. In a motorcycle, where the transmission may be lubricated by the engine oil, an engine oil that does not have the same level of friction modification (for fuel economy) of a typical passenger car engine oil will provide better transmission performance in terms of transmission lock-up and slippage. So motorcycle engine oil does not contain the friction modifiers of a passenger car engine oil. The second area of concern for motorcycle engine oils is that they tend to shear (breakdown viscosity) more quickly than a typical passenger car. Mobil 1 motorcycle oils are designed to provide exceptional protection against viscosity loss.';Is motorcycle oil different than regular motor oil, and if so how? Thanks!?
    In general, no, the oil is no different, but it is completely dependent on what type of engine you have and what the oil is being used for. If it's engine oil only, then no difference, but if it has other functions/uses then it would be very different. Check an owner's manual for the correct information or call a motorcycle shop/store and tell them the make and model of your motorcycle and they can tell you more specifically what oil you need to be using.Is motorcycle oil different than regular motor oil, and if so how? Thanks!?
    Basically, no.


    If you want the best lubricity, better than synthetics, Shell Rotella-T
    Meny motorcycle engines share oil supply with the transmission The load pressure from the gears can cause oil to break down( lose viscosity) fast like within 1000 miles
    Yes regular oil has friction modifiers in it that can cause oil bath clutches (like most motorcycles have) to slip. Motorcycle oil does not have this.
    Yes most regular oil has friction modifiers in it that can cause clutch damage. you can check on the back of the oil bottle in the service star. it will say energy conserving if it has friction modifiers in it. if it doesn't it is ok to use. most light car oil like 5w-30 10w-30 etc is energy conserving. most heavier wight oils aren't energy conserving 10w-40, 15w-40 etc.
    I never put motorcycle oil in my bikes. Any good brand name automobileoil without moly is as good, if not better, than motorcycle oil. Moly causes wet cluthes to sometimes slip, so skip it.
    The difference in regular motor oil and motorcycle oil is motorcycle oil is a heavier weight oil. Also, certain motorcycles require a different type of oil for different parts of the engine and drive chain. A harley for example can have upto 3 different types of oil used. If done regularly, putting conventional motor oil in a motorcycle engine could cause damage.
    Motorcycle oil is formulated to withstand the higher revs that a motorcycle is subjected to and to also deal with the wet clutches. Bikes have twice the redline that most cars have, creating a much more stressed environment for the oil. It will maintain viscosity longer and will not break down under the shear forces in a motorcycle engine.
    Well except for special applications like in your first answer, I'd say not so much. Barring you're running your bike in the Daytona 500 in over 100 degree heat. There are only so many refineries and a lot of different brands come from each refinery. But everybody has their own opinion on what oil to use. Straight or multi-viscosity, synthetic the one thing I think all will agree on is regular oil changes. I usually use Castro 20-50 in my motor with Lucas oil making up a percentage for what I figure is a little extra protection. If you change your oil often even the cheaper oils won't have time to break down. On the bike I change my oil and before I button things up I pull the plug and let her run while I pour an extra quart or two into the oil bag just to try and flush out as much of the old oil as I can. Want a above average oil try Torco. Expensive and hard to find but Torco, Castro or any other change it often, I don't like to let it go to 2500 miles, and it won't be oil breakdown you lose your motor over. Just my opinion. And here I'm assuming your talking mainly motor application. Like the first answer said different applications different weights and additives. Again main thing for any of it is the prescribed intervals of oil change if not more often.
    KB is right on.

    Can you put Lucas oil treatment into a motorcycle?

    Call lucas... I don't know on the honda... on Harleys we run Lucas oil and treatment in evo's and lucas syn w/ their new full synthetic additive in twin cams (after 1000 miles with non syn.) we are hi performance guys dyno-ing and pulling motors appart constantly... Lucas gives us more hp less wear and up to 20 degrees cooler (syn).Can you put Lucas oil treatment into a motorcycle?
    Yeah, but why would you want to?l





    I'm not familiar with Lucal oil treatment in particular, but there are two kinds of oil treatment: 1. ';Motor honey'; that thickens the oil, and 2. Detergent and viscosity improvers.





    You don't want motor honey. Pistons and cylinders are fed by oil being slung off the con rods as they flop around in your engine. Thick oil doesn't sling as well as oil right out of the can. Besides, your engine's tolerances were designed to run using a particular grade oil. Thicker oil will starve close tolerance parts for lubrication and your engine's performance and longevity will be shortened.





    Detergent and viscosity indexers aren't necessary if you started with a good quality oil. If you started with a crappy oil, these won't make it lubricate better, they just improve it's temperature range and stabilize it a bit.





    My engine has over a quarter million miles on it right now and only started burning a little oil at startup. The oil level doesn't change much in its 2,000 mile service interval.Can you put Lucas oil treatment into a motorcycle?
    Sure can. And you'll notice the diff. almost immediately !
    You can it dont know what kind of engine its going in but thats whats it is made for


    After break in';because it never will'; I rather use a teflon additive adds 60% to engine life

    What kind of oil and where can i find an oil filter for my 1980 suzuki gs750l motorcycle? thanks.?

    just bought it and need to do this work asap, but not very knowledgable with bikes.What kind of oil and where can i find an oil filter for my 1980 suzuki gs750l motorcycle? thanks.?
    many bikes dont have a filter....you can never go wrong with 10 w 30 in cool weather and 20 w 40....20 w 50 in hot weather....call suzuki dealer and ask for filter...they will knowWhat kind of oil and where can i find an oil filter for my 1980 suzuki gs750l motorcycle? thanks.?
    Check the owners manual if you have it or some bikes have the specific weight stamped on the dipstick. Or go to the Suzuki dealer and ask buy you filter there

    Changing oil in a Honda VTX 1300 Motorcycle?

    I have an 05 Honda VTX 1300 motorcycle. What is the weight of the HONDA oil that is used by dealers for this application? How much oil does my motorcycle hold?Changing oil in a Honda VTX 1300 Motorcycle?
    The 2005 Honda VTX1300 uses a Pro Honda GN4 or a Pro Honda HP4 (without molybdenum additives) 4 stroke motorcycle oil, or it's equivalent. The GN4 being a conventional Motor Oil and the HP4 is a Semi-Synthetic blend.





    Recommended Viscosity is SAE 10W-30, but 10W-40 is fine. The difference between the two would be the ambient temperature that they can be used in. For colder climates, use the 10W-30. For warmer climates, use the 10W-40.





    The unit takes about 3.9 U.S. Quarts.





    Useless Oil Information:


    API Classification: SG or higher except oils labeled as energy conserving on the circular API service label.





    JASO T 903 standard: MA





    Do not use oil additives. Do not use oils with graphite or molydbenum additives.Changing oil in a Honda VTX 1300 Motorcycle?
    You may ask a friend of mine Michael. He is a expert on motorcycle. You can contact him on LoveBiker.com directly by search his username.
    I have a 2004 VTX 1300 and on the repair order invoice from Maxim Motorsport the oil is noted as 10W40DRUM OIL. The invoice indicated that it took 4 quarts. I bought an extra quart that I carry in my saddle bags whenever I go on road trips.

    How much oil does a 1994 Virago motorcycle take?

    With oil filter change 3.3 qts Without oil filter change 3.2 qts

    Motorcycle oil change?

    I have a brand new Kawasaki Ninja 250 08'. It's time for an oil change, but I was just wondering what the price would be if I were to go to a shop and the price of doing it myself (like what the price of the oil will be). Can someone help?Motorcycle oil change?
    would probably cost you 60 dollars or more to have someone do it for you.... to do it yourself would be 20, if that.....





    and it's 1.9 liters (2 quarts) of 10w30





    why even pay anyone to do it for you, especially on a bike?





    all you do is drop the skid plate (if you have one) remove the drain bolt, replace the filter (or if you have a screen type filter, clean it out) put the drain bolt back in and then put in a funnel and fill... you really wanna pay someone ANYTHING (much less 40-100 bucks) just to do that?





    mechanics make good money becuase people often let themselves be over intimidated by cars.Motorcycle oil change?
    I don't know if shops will even do oil changes on bikes. If so, they would charge you $10 or so just to do it, plus the cost of the oil.





    Your Ninja probably takes 2 quarts of oil and a filter. Look in the manual and it will tell you. You can buy special motorcycle oil for like $4-$5 per quart, or you can use car oil which costs about half that. Some people swear you need special motorcycle oil, but I use car oil and I just went past 70,000 mi. on my Honda and it works just fine. The filter might be anywhere from $5 to $10, and you need to get that at the dealer, or mail order.





    Changing the oil is not hard at all, but it's a little messy. You have to warm the bike up so the oil is 'loose', then drain out the oil, pull out the filter, replace the filter and the oil drain plug, then fill with the correct amount of new oil. Its about a 15 minute job. We have curbside recycling and they take old oil. Or you can take it to any gas station or place where they change oil and they will recycle it for you.
    I am not sure on exact prices, but i could see the dealer having a somewhat high price for an oil change. if you think about it, they are still going to put in the same oil you would, so you need to pay to cover that cost, plus the cost of labor for someone to do the job. i know the new '08s have a completely different design than the previous ones, so im not sure exactly how to change the oil on one, but it (hopefully) shouldnt be too hard. i would say if you have the time, you should buy the oil and do it yourself. you will probably save some money, plus be you will learn about your bike and know how to do it in the future. but sometimes, if you are busy, its hard to find some extra time for something like that. you should have the owners manual for your bike, it will tell you what type of oil exactly to put in the bike. good luck
    I have a Goldwing...I just started using AMSOIL...Great stuff. It will give you 5000 miles between oil changes and has added mileage to my tank!! BONUS!





    Most places will charge you 50-60 bucks for the labor PLUS cost of oil and filter. I would think you should let your dealership do your first...also have them ';check things out...'; ya know? After the initial change you could do it your self and save the money.





    Welcome to the bike club....it is the best thing going!! Good luck and ride SAFE!!
    Buy the mfg. service/shop manual. This alone will put you on the right road that avoids the trouble you get when blindly trusting your bike to others. Most people with bikes do the work themselves or allow it to be done by those who have worked to earn trust. BTW, it's therapeutic.
    It cost me about $18 for a gallon of Rotella synthetic and bout $7 for a Pure One filter. So, about $30 with tax.


    (Oil will run anywhere from five to twelve bucks a quart.)





    You should be doing this yourself, anyhow.
    The first service should be done by dealer, so they will check everything on the bike, for second and so on, just do by your self, very easy, manual should have instruction. Good luck. Ride safe.
    Last oil change I did my self cost me $11 and 30 minutes of time.





    4 quarts and filter - $11, quality time wrenching on your bike - priceless!
    My dealer (Kawasaki) charges $29.95 for an oil change.
  • How do you add message boards to a website
  • Is it true that before changing the oil on a motorcycle you need to let it warm up for a few minutes?

    if so why? and why is it that on a car you don't have to do that?Is it true that before changing the oil on a motorcycle you need to let it warm up for a few minutes?
    The first answer is correct: all engines should be warmed up before changing the oil. This is because oil gets dirty from use and the accumulation of dirt %26amp; metal particles. After the engine cools, these particles settle to the bottom of the oil pan making a sludge.





    If the oil is cold, that sludge stays in your engine during an oil change and is recirculated in the new oil, defeating the purpose of changing the oil in the first place. Warming the engine resuspends those particles into the oil, and you drain them out before adding new oil.Is it true that before changing the oil on a motorcycle you need to let it warm up for a few minutes?
    c'mon son, just warm it up, its better for the engine cause youl get most of the old oil out and better for your engine spirit. thanks for asking!!! also, for a car they normally do the same, it gets the sludge out better when the oil is hot. nuff said, party on!!!!!
    You don't ';have'; to, but it's a good idea.


    Warm oil flows faster/easier/quicker than cold, thick oil.


    Plus, the grit/sludge/gunk/debris will be mixed better with the oil, allowing more of it to flow out with the draining oil.
    on any and every engine,car or bike,it always helps to warm the oil up...when its cold its thicker,warm its thinner and drains quicker/better.
    Actually any internal combustion engine should be warmed up before you change oil.......It allows you to drain all the old oil
    I just drain it, fill the oil tank with kerosene, run it for one minute and drain it again and then fill with fresh oil. The kerosene cleans the motor out real well.
    no. Most modern oils are that thin they don't need to be warmed up to drain. This idea goes back to the days when engine oil was thicker than porridge.

    I have a 1973 honda cb350 motorcycle and it is leaking oil where the magneto is located.?

    How involved is it to fix the leak. Is it an oil seal and will the engine need to be taken apart to get to the old seal.


    ThanksI have a 1973 honda cb350 motorcycle and it is leaking oil where the magneto is located.?
    Anytime you have to take an engine apart its a big deal.I have a 1973 honda cb350 motorcycle and it is leaking oil where the magneto is located.?
    are you talking about that it has oil covering the generator,


    because thats normal,


    as for leaking from the casing, thats 3 screws to get the outer casing off, and will only reuire a dab of gasket sealer to sort out,


    if its leaking from further towards the engine,


    then you will have to drain the oil,


    and remove another 6 screws, and replace the gasket paper,





    have a look at the pic
    A magneto cover is usually one of the easiest things to remove and put back on, so good luck finding a new gasket and succes with replacing it. Do take care to remove any and all remains of the old gasket.


    PS I don't know if they still have something called 'liquid gasket', that may work too.
    go here %26amp; download the manual for free...





    http://www.diff.ru/manual/man.php








    or send me your email address %26amp; I will send you an exploded parts Diagram..

    Is it normal to have metal shavings in the oil in my new Honda Rebel Motorcycle?

    I purchased a new 2006 Honda Rebel a couple of months ago and decided to change the oil at 250 miles because I was told that a new engine will have metal shavings in the oil. So I changed it and did see the tiny specks of metal.


    So then I spoke to another person about it and was told that this was NOT normal and to take it back to the dealer.


    Now I don't know what to think. Does anyone know for sure??Is it normal to have metal shavings in the oil in my new Honda Rebel Motorcycle?
    Stop and listen- please. Metal shaving during the break-in period are 100% NORMAL. The engine is breaking in- the pistons are conforming to the cylinder walls and some small metal shavings are normal- infact it's supposed to happen. It means your engine is breaking in properly. I have years of experience with this, it is 100% normal.Is it normal to have metal shavings in the oil in my new Honda Rebel Motorcycle?
    no
    Its normal, You can change the oil a couple times and still see metal bits on a new motor, I would have changed the oil sooner but I use the Motoman breakin,


    http://www.mototuneusa.com/break_in_secr鈥?/a>
    Normal for pistons to scrape off fileings and metal from bearings to show up it is the next couple of oil changes every thing should stay clean. If ir runs good no noises just keep watching each of the next changes take the oil drain pan out in to the sun and see sparkles in the sunlight.
    It is normal for a new engine to have metal shavings in the oil. Clean the screen, put new oil in and ride it. Change the oil every 500 to 1000 miles and clean the screen every other oil change. You may still see some metal flakes in the first 3000 miles, but they will diminish.





    If you store the bike during winter, change the oil and ride around the block (to warm it up) before storing it. In the spring, change the oil before you ride it again.
    A motorcycle with an oil filter will strain any metal shavings in the oil. Since your bike only has a screen, some metal will be evident. To give yourself piece of mind, ride it for another 100mi and drain a few ounces out. If you see any metal, top up the oil level. Take it to your dealer for an oil change. Tell them about the metal and make sure that is mentioned on the re[air order. This way you will have a record of your concerns. Keep a friendly relationship with the service manager during the life time of your bike. If you have problems after the warranty runs out, your good friend, the service manager, will ask Honda to repair your bike under their ';good will'; policy.
    No, don't take it back to the dealer. The shavings are perfectly normal. As most of the other guys here have said, it is normal break in wear and tear. The pistons and rings are beginning to seat into the cylinder heads. The cylinder heads are designed to be a little tight to allow the pistons to wear them into a snug fit. The shavings are a result of this fitting process. It is like breaking in a pair of shoes. Instead of shavings, the leather stretches a little to fit your foot.





    You could have waited until 800 miles to change your oil. When you get there, change your filter also.
    Well, since you did it %26amp; found them yes, they do happen...friction happens %26amp; oil isn't in all places when it needs to be...





    If by some chance someone else had found them %26amp; made you panic, then tried to sell you a load of goods, I would still say it is normal, %26amp; to look for the shaker of shavings they have to put into your motor. They should become less noticable as time goes on, but wear %26amp; tear is just that! Use a *good* oil %26amp; change it at proper intervals, unfailingly.


    Why do you think rings leak after a while? Where would the by product from that wear go? Into your oil pan...


    Relax, change your oil religiously %26amp; do regular upkeep on your cycle, %26amp; all will be fine.
    Yes, it's normal. No matter how well the engine and the parts are machined, you're bound to get some metal flecks in the oil while you're breaking it in. Change your oil again at 1,000 miles and again at 3,000 miles. If you still see metal flecks in the oil at 3,000 miles, talk to a mechanic at a Honda dealership.
    Keep the bike or pass it on to someone you know the only time you the shaving is 000001 to 6000 for a small bike the oil will not be clear for smaller parts but by now it should had gonna a way. But keep a record and show it to your dealer (but two time only and do it this week end)
    Metal shavings means a blown piston normally, I don't know about your bike, but it sounds kind of strange. I'd contact an authorized honda mechanic,Quickly. And limit riding time until you do.
    I agree that metal shaving are not supposed to be in your oil. Kind of defeats the purpose of using a lubricant.

    I hav a Harley Softail Delux, can I use automobile motor oil or only motorcycle oil?

    The manual says to use harley davidson oil, however tests between auto oil and motorcycle oil showed that the motorcycle oil broke down before the car oil. I know 20 years ago there was no such thing as motorcycle oil and they charge about 300 percent more for motorcycle oil. I used to hav a Suzuki motorcycle and the manual said you could use automobile oil.I hav a Harley Softail Delux, can I use automobile motor oil or only motorcycle oil?
    Simply, no. Automotive oil uses additives designed to reduce friction in the engine. On your bike, this oil would eventually ruin the clutch. Yes, it costs more to buy the proper oil, but in the long run it will save you money on repairs to your clutch. If you want to save some money, the Shell Rotella blended synthetic is a bargain. Just make sure to look at the oil specifications in your manual and make sure the oil you buy meets those.I hav a Harley Softail Delux, can I use automobile motor oil or only motorcycle oil?
    i don.t know harley has had very different weight oils in theirs over the years than the norm if you have the manual or a quart of oil i would look at the weight and the service rating if you could get an automobile oil with the same i would say it would be ok








    i didn,t think harley clutches ran in the engine oil





    of course synthetic
    unless u want to pay for a new engine, u best use only 20w50 oil. standard car oil's are too thin. this engine is partially oil cooled. u can listen to another hd owner, or learn the hard way why hd uses 20w50. either mobil1, amsol, or hd's. never quaker state.
    You can use automobile oil in a motorcycle as long as it's not ';energy conserving'; oil. The energy conserving oils have additives that are not good for the motorcycle clutch. Most of the 10w30's are energy conserving. Check the back of the oil container to see if it's energy conserving or not. I use Shell Rotella T 15w40 in my Vulcan and have not had any problems.
    No you can not if you use other oil than for a motorcycle which is not recommended use an oil for diesel engines a 20w 50. Otherwise you will be purchasing a new engine sooner or later. that is an expense you do not want. There are plenty of good motorcycle oils out there for you to choose from Do your research and you will find the right one for you. Oil is the single most important thing you can use in your engine. so choosing the right one is very important also on a Harley you need to change your oil every 2,500 miles too.
    Auto oil should work OK, but, a while back, Harley was recommending the use of diesel crankcase oil (Rotella, for instance) in the event that HD brand oil was not available. I believe the reasoning was that diesel spec motor oil has more additives designed to carry off heat than most motor oil, something to consider with an air cooled engine.





    I use Rotella 5 W 40, full synthetic in a Honda Magna and VLX Shadow, by the way. Both are liquid cooled V engines.
    the biggest difference is that a motorcycle bathes the gears in the oils as well. We don't have separate heavier weight tranny fluid like a car. That being the case stay with whatever is recommended for your bike.
    If your gonna ';stray'; from HD oil....





    The Shop manual sez , use an oil that you would use in





    a Diesel engine....





    Gotta Fly...


    Mike %26amp; Jaz in MN
    Though u can find automobile oil viscosity similar to your HD, characteristic of the oil differs in properties required for your bike. However, it will take awhile before the problem emerge!





    Safe riding...


    Blue Sky, Endless Road...
    No, Just as the oil have change for the cars it has also changed for the motorcycle.





    Be Safe
    unless u want to shell out about 6,000 for a new engine not including labor to install, u best run only 20w50 mc oil. harley's are not like the metric bikes that can get away with it. hd's are air cooled, and some of this cooling also comes from the oil. car oil is just too thin to withstand the heat hd's engines will put it thru, and they will break down very quickly. air cooled engines will run alot hotter in the oil zone than water cooled engines.


    u can run 20w50 synthetic (amsoil), or mobil1, but it is strongly advised u only run 20w50 absolute minumum in the deluxe. dont come back bitc-hin about 'hd's are leaky junkers' when we expressly warned u NOT to run weak car oil in the engine.





    and btw: clutches and engines in hd's use different oil's; sportsters being 1 of them. better thoroughly read that manual and adhere to it to the letter....or u will pay severely in engine damage that wont be covered by warrenty
    in the older Harley just any good 50 wt. with Harley oil you are just paying 2 times as much for a name.and if it says motorcycle oil it might be 2 cycle oil. back years ago most motorcycles were 2 cycles. Harley's %26amp; most other motercycles use 4 cycle oil now. my bike as been down for a few yr's.but i ,ve switched over to royle purple senthyitic in all my cages, and i love it. if my bike was up that's what i would use, if they make it in a 50 wt.

    Which oil to use in 2-stroke motorcycle with wet clutch?

    I have a 2 stroke 1981Yamaha dt100. It is oil injection so i was thinking of using any synthetic 2-stroke oil for the injection system. Is there any specific kind you would recommend? I was also wondering what to put in for the gearbox/ wet clutch. I was thinking of just putting in standard automobile oil but i don't know what kind is the best, or if it is bad for the wet clutch system and make it slip. Please let me know what i should do.Which oil to use in 2-stroke motorcycle with wet clutch?
    All 2 stroke engines use motor oil in the crankcase.


    Use quality, brand name, 4 stroke motor oil (10W-40 for your bike).Which oil to use in 2-stroke motorcycle with wet clutch?
    your best bet is to use motorcycle specific 2 stroke engine oil i have seen this at auto zone, advanced auto parts and also pep boys but you can check any of your local auto parts stores for this many automotive oils contain chemicals to reduce wear on the engine if used in motorcycles this can cause your clutch to slip in a wet clutch system





    Valvoline offers a great 2 stroke engine oil specifically for motorcycles


    http://www.valvoline.com/pages/products/product_detail.asp?product=75
    injection system for fuel use any mixing oil and for gear box any 30 w

    How do you change your motorcycle oil?

    I go for a ride and get it all warm.


    I put a pan underneath and pull the plugs from the trans and oil tank.


    When they're done dripping, I put the plugs back.


    Then I pull the plug from the primary, and remove the derby cover.


    When that's done dripping, the plug goes back in.


    I remove the old oil filter and replace it with a new one.


    I put a quart in the primary and replace the derby cover.


    I drop a quart in the tranny.


    3 quarts in the oil tank.


    Dump the used oil in the storage container.


    I then call it good and go for another spin.





    Who needs ';people';?


    I get TWO excuses to go far a ride.


    As if I needed any.How do you change your motorcycle oil?
    I usually do it just after I've ridden it so the oil is hot. I park and wait about 15 minutes then remove the drain bolt and drain the oil into the pan being careful not to burn my hand. When it quits draining I replace the bolt.


    I remove the filter over a drip pan and replace it.





    Then I open the crankcase vent tube, or ';drool tube'; and drain that into the pan..How do you change your motorcycle oil?
    Run it for 3-5 minutes in order to let the oil drain faster.





    -Take of the oil drain plug on the bottom of the oil tank.


    -Take off the oil filter.


    -Put on a new oil filter.


    -Put the oil plug back in.


    -Add oil.








    Your User's Manual should have step by step instructions (with pictures) on how to do this yourself.
    I don't change it myself.





    I got people.





    Those people are mechanics at a Kawasaki dealer who change my oil for $30.
    Take it to the mechanic!
    I don't. I have people for that.
  • How do you add message boards to a website
  • What oil is used in the bottom of a kawasaki 90 motorcycle?

    This is a 1973 modelWhat oil is used in the bottom of a kawasaki 90 motorcycle?
    Being it is a 2-stroke motor, that is the oil that your gears and clutch run in. You can use car oil like 10-40 or 20-50 or they make a specific gear oil for transmissions in 2-strokes. It holds up better to the stress. Being it's not a race bike I would opt for the cheaper car oil. Drain it at the bottom and fill through the cap. I don't know what model you have but most of the 90's had a dip stick in the cap.What oil is used in the bottom of a kawasaki 90 motorcycle?
    I would use a decent name brand 10W40 oil in it...

    Synthetic oil in an older motorcycle?

    I ride a 1984 honda magna 700 (wet clutch) and am considering switching to synthetic oil, thought I might try shell rotella-T, which is not a motorcycle specific oil. I am mainly considering this because the engine knocks until the oil gets warmed, about the first 5 minutes, and most of my rides aren't much longer than this. Anyone with experience riding with synthetic? Is this a good idea?Synthetic oil in an older motorcycle?
    Rotella is for diesel engines. What grade of oil are you using now? A knock in the engine sounds very bad , like a big end bearing is worn and the slop only goes away when the metal has heated up and expanded. This is quite likely as you ride the bike with the engine cold all the time. How long between oil changes?





    Use a 20W-50 at least. Do not use any oil that has friction modifiers or similar, as this will stuff your clutch.Synthetic oil in an older motorcycle?
    Stick with motorcycle products.


    I use synthetics exclusively, they have great wear protection and slickness. They definitely do not cushion, and/or deaden sounds the way petroleum does, so your engine will seem a little noisier not the other way around.

    Are Triumph motorcycle motor mounts the same between oil in frame and pre oil on 750's.?

    I have a 79' bonneville 750 oil in frame and I want to install it in a British Cycles hardtail frame # 544-700 that uses pre-oil in frame motor mounts. Will this bolt right up?Are Triumph motorcycle motor mounts the same between oil in frame and pre oil on 750's.?
    Yep.

    Is motorcycle oil diffrent from automobile oil or just a scam to charge 5.00 a quart at dealer?

    There MAY be a small difference in anti-foaming ingredients due to the motorcycle engine running at much higher RPMs than normal car/truck engines.





    There may also be a benefit if you have an engine that, as per manufacturer specifications, requires a non-standard oil, or an older bike that may have seals/gaskets that could be adversely affected by the newer blends.








    Other than that, it is dealer profit on a standard oil that may have been re-labeled to make the package appealing to motorcyclists.





    Check the manufacturer specifications for the oil itself (ASE SF/SH etc. and go with that.Is motorcycle oil diffrent from automobile oil or just a scam to charge 5.00 a quart at dealer?
    I have yet to see a test where someone could measure a real difference, or an account of a bike engine killed by automotive oil. There are a couple things to watch for, though, if you're going to put car oil in a bike.





    First, don't get an oil that's too thin, and second, don't get an oil that is marked Energy Conserving. Automotive oils are often like this to improve fuel economy. But these super-thin oils don't work on a motorcycle clutch. Check the oil weight numbers and look for the API mark, and get one with the weight that matches what your motorcycle owner's manual says to run.





    I use a dealership service manual to maintain my bike - and it DOESN'T say to use motorcycle specific oil at all, just gives the grade and thickness.Is motorcycle oil diffrent from automobile oil or just a scam to charge 5.00 a quart at dealer?
    I buy Castrol motorcycle oil for my bike at a local auto parts store. ~$3 a quart.
    I thought I'd weigh in being it's a question about lubricants. Everyone knows (except some of you experts) that motorcycle clutches and transmission gears run in the same oil that flows through the motor. Motorcycle oil has different qualities because of that. The bottom line is that if you have a $200 Honda run anything you can find. If you have something worth a crap then spend $5 on the oil. *Don't skimp on the lubricants. *
    Motorcycle oil doesn't have friction modifiers like automotive oil. Thats really the only difference.





    You can use auto oil in a motorcycle and not hurt anything but the friction modifiers can cause clutch slippage in some applications.





    Use whatever you want tho. Debates on which oil is best to use will be going on until we run out of the stuff.
    You can run automotive grade oil in bikes, but I dont recommend it. Usually, oil at the bike dealerships and shops are competitevly priced, unlike car dealerships, which I do agree with the above member saying they rip you off.
    Scam


    Motorcycle manufacturers don't have their own oil refineries.


    Someone else makes the oil and motorcycle manufactures put their name on the bottle.


    http://www.xs11.com/stories/mcnoil94.htm


    Motorcycle Consumer News is the motorcycle equivalent of Consumer Reports.
    It's a scam. Honda, Harley, and Yamaha don't run refineries. they buy it form a company and put it in their own bottles. The only thing you have to watch out for is on the API code ring on the back of the bottle is ';FUEL CONSERVING' . Stay away from this if your clutch is a wet sump, it contains teflon and will make it slip.
    Everything is more at the dealer.





    never buy anything but the vehicle there.
    boy you got some real doosies here


    Motorcycle oil is a different viscosity? WTF?


    ahh 10/40 is 10/40


    weights are different? What does that mean?


    They don't make their own oil? Yes, but maybe they do research on what goes into the base stocks


    What the F is a wet sump clutch?








    motorcycle oils have more anti foaming agents in them. As well as many other specific additives. The oil is getting whipped by the gearbox. Foaming is not a good thing.


    Castrol act evo is 3 dollars a quart spend the money
    Not sure if all bikes are like this, but the ones I've ridden all use the oil for the engine and transmission. Bikes have a clutch that needs special additives that car oil probably doesn't have.
    The wet clutch is a big issue. No car oil stocked at chain stores will be compatible. The diesel oils where compatible until this year, they changed it for the new model emissions. Unless you are willing to do alot of oil research your best off sticking with oil made for motorcycles.
    Motorcycle oil and automobile oil are different weights however you dont have to get the oil at the dealer. You can get the oil at any auto parts store. Just make sure you get the same weight oil....
    Mobile Oil seems to have an intelligent response. (link below)





    Also, SportRider mag had a great writeup on oils (link also below).





    For my bikes (Ducati, %26gt;30k miles combined), I run Mobile 1 Synthetic obtained from any local auto parts store.
    weights are different......oils close to the same.....stick to the right weight...

    How do I change the engine oil in a 2001 BMW R1200C motorcycle?

    refer to your Manuel or go online or to your local BMW dealer.it's not rocket science.How do I change the engine oil in a 2001 BMW R1200C motorcycle?
    I hope these links help.





    http://www.autozone.com/


    http://www.info.com/


    http://autoparts.411web.com/


    http://www.carcarecouncil.org/index.shtm鈥?/a>


    http://www.howstuffworks.com/


    http://www.wisegeek.com/

    When is it essential to change oil in a motorcycle ? Is it just like a car every 3,000 miles?

    I do mine about every 1000 to 1300 miles.When is it essential to change oil in a motorcycle ? Is it just like a car every 3,000 miles?
    Yes it is like a car other than lots of motorcycles are air cooled so unless you are running synthetic oils then you should change every 3000When is it essential to change oil in a motorcycle ? Is it just like a car every 3,000 miles?
    Stick to the recommended maintenance schedule published in your Owner's Manual. 90% of them recommend 3000 miles. You could probabley push that to 4000 miles if you use a quality synthetic motor oil like Mobile 1 or AMSOIL. But in any case, don't let it go longer then a year between Lube, oil, and filter changes regardless of your mileage. (Don't forget the LUBE)
    It is MORE important to have clean oil in a motorcycle! Your car has a transmission full of transmission fluid, and the engine is full of motor oil.





    The oil lubricates, cools, and absorbs the nasty byproducts and acids produced by internal combustion, and your transmission hums along without problem.





    On a motorcycle, however, the oil takes care of lubricating the engine AND transmission, so it must absorb more of the byproducts to keep your transmission from corroding as well as having the proper friction modifiers in it to keep your clutch operating smoothly.





    It's not an easy job for a lubricant to do double duty, so the best insurance is to change your oil regularly. 3,000 miles is decent, but change it at LEAST once per year if your bike is Harley fluff that only sees 1,000 miles per year anyway.
    If your bike is air-cooled, I'd recommend every 1000 miles. If it is water cooled, you can go 2500-3000 miles, but do it at least once a year.
    yeppers
    a motorcycle's oil is to be changed every 2,000 miles reguarless of breakdown, wear, or dirt.





    the oil also is part of the transmission, not changing every 2,000 miles will cause the bike's transmission to stick, and you will give your gears a premature wear, and the bike will fail you.





    and unlike a car. you should change your brake fluid at the end or beginning of the season, as long as you do it once a year.





    there is a basic maintinace schedule here: http://www.ninja250.com/ just click on the FAQ button and it will be easy to find. even if you don't ride a 250, the principles are the same. just do it.





    hope this helps.
    3000 miles after break-in.





    During the break-in period, change the oil at about 100 miles even though the manual says wait. That first oil change removes the loose metal bits that inevitably happens during break-in.
    what does manual say...I always did it every 1000 miles on a air cooled bike
    it is very very very recommended to change the motorcycle oil frequently (every 3000 or 4000 or even 5000 as recommended by manufacturer). Most bikes go high RPM and are exposed to extreme conditions where oil is likely to degrade more often. If you use synthetic, then you are less likely to see oil breakdown but keep checking the level especially on older bikes
  • soap opera
  • How to take Harley motorcycle oil tank?

    How could you possibly expect an answer with a question like this ?How to take Harley motorcycle oil tank?
    2009 Harley Motorcycles - Photos, prices %26amp; specifications on all of the new models. If your looking to buy an 09 Harley then please feel free to search our site for the most up to date information available.


    nova


    [url=http://www.harleymotorc鈥?Davidson[/url] Report Abuse
    How to take Harley motorcycle oil tank?
    What the heck does this mean? How to change the oil? I have a motorcycle, but can't make out your question.
    are we talkin' big twin shovelhead, Sportster, what?
    wait until no one is looking and hide it under your shirt

    How to remove oil stains from a textile motorcycle jacket?

    jacket is made of ballistic nylon similar to a gym bag material


    I have tried shout, brake cleaner, oxyclean. Nothin touched it


    I was following a car that was spitting engine oilHow to remove oil stains from a textile motorcycle jacket?
    use shampoo. Any kind that is for oily hair. I use it to get grease/oil from cooking, and cars or bike out of my clothes.How to remove oil stains from a textile motorcycle jacket?
    You could try a product called ';Goo Gone';. Lots of stores sell it, like Walmart, Lowes, Home Depot, etc.


    It works for many hard to remove stains like oils, adhesive, gunky stuff.


    Wash the jacket when you are done. Goo Gone doesnt have a bad odor, but it should be washed off.


    Good Luck!

    How much oil and what kind should i use in my 1985 kawasaki 750 GPZ motorcycle?

    I just recently was given this motorcycle and it is in decent shape. It needs some minor maintenance and I have no clue what i'm doing. I am a fast learner and want to do most things myself. Any info about these bikes would be much help.How much oil and what kind should i use in my 1985 kawasaki 750 GPZ motorcycle?
    Hey, where do I find someone to give me one of these???? LOL.





    Oil capacity with a filter change is about 3.5 qts. Run motor, let cool, put bike on center stand and then check the sight glass and add as needed to bring the level between the lines.





    Kawasaki motorcycle oil is 20-50, but any 20-50 motorcycle oil is fine.





    The only bad part on these motors were the cam chain tensioner. You may need to replace it if the bike has over 10k. Otherwise they are very reliable and put out decent power. This is a great bike and should bring you years of fun.How much oil and what kind should i use in my 1985 kawasaki 750 GPZ motorcycle?
    Your best bet is going to be to get a Clymers/Chilton manual for your motorcycle. Do a google search for your model + clymers for results. Ebay can also be a good resource for the service manuals.





    Your bike takes around 3.4l oil with a new filter. You will want to put the bike on its center-stand and add oil until it fills between the lines on the viewer. I have posted links below to some good kawasaki forums for more information.





    Oil changes are easy and with a little bit of searching you will be able to do it yourself no problem!





    I recommend Shell Rotella-T Synthetic Oil 15W-40. Seems to be the most recommended for the GPZ 500.
    i would use a 10/40 in this, not too sure how much, if you got the bike for nowt then go buy a manual, these are very simple bikes and you will save the outlay several times over.
    sens it is a 1985 use like 20w- 50 oil and dont go to cheap
    rebel if in doubt goto dealer for the oil. cost is marginal
    http://www.amsoil.com/redirect.cgi?zo=14鈥?/a>

    What type of oil and coolant do I put in my motorcycle?

    Hi, Have a 1986 Kawasaki 454 ltd motorcycle..after this winter I would like to change the fluids..does anyone know what type of coolant and oil i put in it?


    Thanks in advance!What type of oil and coolant do I put in my motorcycle?
    You need to use a 10w40 motorcycle oil, honda GN4 is a great oil.The key thing here is it has to be a motorcycle oil, not car oil.Motorcycle oil has friction additives for the wet clutch they have.If you use a car oil it will cause your clutch to stick and it won`t dissengage all the way when you pull it in, and the bike will ';creep';.As for coolant, that`s not as critical and you can use an automotive coolant mixed 50/50 with water.What type of oil and coolant do I put in my motorcycle?
    They are right, use a oil designed for a motorcycle..... as for coolant, use a low silicate ethylene glycol coolant at a 50/50 mix, with distilled water. Napa's brand is good (this is made by Valvoline anyway) or zerex G-05 is better...
    go by the manufacturer spec. %26gt;%26gt;technical manual 86 kawasaki 454 motorcycle.
    Well, I just got done changing oil in our 89 Honda Fourtrax 300 fourwheeler. I wanted to run synthetic oil in it, but it is considered 'just another one of the farm equipment' and because of that, ever since new, all we ran in it was Cenex 15W-40 Heavy Duty Diesel oil. It runs fine on it.
    As a motorcycle engine, clutch and gearbox are combined you need to buy a specific motorcycle oil due the additives it contains which are specific to ';wet'; clutches and the heat and friction characteristics of these. Regular oil will cause slippages, will overheat and breakdown rapidly losing its effectiveness as a lubricant and causing damage.


    Coolant - so its a liquid cooled engine, a good quality ethyl glycol based coolant is best due to the alloy components, which you should be able to pick up from the same bike shop you find the oil.
    windsheild wiper fluid. works like a charm. That or urine.

    How do i drain the 2 stroke oil out of a motorcycle engine? ?

    my spark plug is black because there is too much oil going into the engine from the automatic mixer, firstly how do i take this oil out? is it from the petrol tank or do i have to change the engine oil? and how do i do it? is it straight forward?


    thanks xHow do i drain the 2 stroke oil out of a motorcycle engine? ?
    Always give year, make, engine size and model # when asking questions. We need all of that info to give an informed answer.


    The mileage would also have been helpful.





    Spark plugs starting to foul on 2 stroke engines, are a sign of a worn out top end (cylinder, piston %26amp; rings).


    The low compression isn't strong enough to fully burn the oil in the fuel mixture.How do i drain the 2 stroke oil out of a motorcycle engine? ?
    There is no accumulation of oil (as in a crankcase) in a two-stroke engine and oil does not need (can't) be drained. Most engines that are two-stroke must have the oil mixed with the petrol [we say gasoline :)] as it goes into the tank. Newer two strokes are built so that not much oil is used and the plugs don't foul often but older ones are prone to require plug changing often. Check your manual for the procedure for setting oil usage and/or mixing. I'm not familiar with engines that have an oil tank and automatic mixing so am not much help to you if your has that equipment.
    Don't take the oil out -- that's your engine oil -- it gets used up so it doesn't have to be changed.





    If the mixer is mixing too much oil, one possibility is that the fuel line is sucking air, or there's a restriction in the fuel intake - less fuel going in means a higher proportion of oil.





    Are all the plugs black or just the one? Could just be you have a rich mixture fouling the plugs.
    Drain the oil reservoir and drain the fuel tank. Start it up until it quits. All the fuel/oil mixture will be out of the lines and the engine by then.

    How much oil do i need to change the oil on my 2005 kawasaki ninja 500 motorcycle?

    i just bought the bike and i dont have the manual. and what type of oil do i need?How much oil do i need to change the oil on my 2005 kawasaki ninja 500 motorcycle?
    most bikes use 4 qt. with filterHow much oil do i need to change the oil on my 2005 kawasaki ninja 500 motorcycle?
    read the owners manual.
    Depends on how hard you ride it, but generally every 4,000 to 5,000 kilometers (2,500 to 3,000 miles) is a good interval.





    You need not replace the oil filter every change, though. Every second oil change is OK for filter replacement.
  • soap opera
  • What kind of oil beside expensive Harley oil is a good alternative for my motorcycle?

    Rotella 10w30... If you think regular oil, used in water cooled auto engines are the same.. you need to do alittle more research........What kind of oil beside expensive Harley oil is a good alternative for my motorcycle?
    Try Cycle Gear website, Kendall makes a good oil, V-Twin offers a good product too! may use Harley's oil every other time to keep it balanced thats what i do... Harley one oil change then Kendall the next.. but remember every 3000 miles and check your air filetr every 5000 miles...sometimes that cuases gummy action on gas add a additive every 10.000 miles like 108 octane to keep injector's and carbs clean too!What kind of oil beside expensive Harley oil is a good alternative for my motorcycle?
    any oil or synthetic that meets or exceeds factory specs is fine. Amsoil is really good, but there are toons of choices. Mobil 1 synthetic has oil for your harley. engine, primary and tranny all three (not all the same oil) . Don't ever fall for the ';one oil for all three holes'; bull. Good way to burn up a bike. Use the proper grades, whichever you go to.


    Go to amsoil's web page to see their head to head comparison with most other lubricants.


    Good luck
    castrol gtx 20w50 or any good brand of 50wt oil- there is nothing special about harley oil except the label
    EPA has forced newer oils to have greatly reduced amounts of friction reducing zinc. For roller tappet engines, that's no big deal but for older cars and bikes with flat tappets, it could lead to problems down the line. Because of that, I use oil meant for older diesel farm tractors. I forget the API rating, but it's something like CD or CE and still has higher zinc levels. Check your local farm store like Orschelns, Tractor Supply Co, etc.
    I've been using Mobil1 on both my V-Rods. No oil burning problems.
    I use Amsoil. Though its a little higher in cost than most, I've had good service with my bikes.
    Dont use regular oil. Use regular motorcycle oil from a motorcycle shop. Motorcycle oil has a high zinc content. Rotella-T and other diesel oils work too.
    Dont know ,What kind of rolling thunder machine do you have?


    Stihll makes some good 2 stroke stuff
    while all Hd shops will have you drinking the HD cooliad and try fear tactics to persude you to stall with the factory recomended oil, Take a look here. For me I run this in my Harley, Kawaski, FordF150 and the Infinity. Great stuff!!!





    http://www.royalpurple.com/motorcycle-oi鈥?/a>





    2-Cycle Engines (pre-mix) 2-Cycle TCW III Racing5





    2-Cycle Engines (oil-injected) 2-Cycle TCW III





    2-Cycle Transmissions Synchromax





    4-Cycle Engines Max-Cycle3





    4-Cycle Transmissions4 Synchromax





    Harley Davidson Evolution and Twin Cam Max-Cycle 20W50





    Harley Davidson Evo and TC Transmissions Max-Cycle 20W50





    Harley Davidson Primary Tank Max-Cycle 10W30, 10W40, 20W50





    Harley Davidson Sportster and Buell Engine Max-Cycle 20W50





    Harley Davidson Sportster and Buell Transmissions Max-Cycle 10W30





    Chains Max-Chain
    we use mobil1 in our motocycle shop.
    AMSOIL MCV 20w50 IN ALL 3 HOLES.....engine , primary and transmission.
    I use Harley Synthetic


    BUT


    Ihave a friend who says Mobil 1 tests out as good
    please do NOT use just any 'good' brand of 20w50oil... they are made for auto's which are not air cooled. It must be for an air cooled motor or have a diesel rating. Many bike shops sell alternatives.. REV TECH and even HD oil at cheaper prices than the HD dealer...but PLEASE oil is cheap in comparison to a rebuild. Don't skimp and change w/filter OFTEN.
    castrol

    Whats the oil capacity for a 1982 Honda twin star motorcycle?

    Also where is the full mark on the dip stick?Whats the oil capacity for a 1982 Honda twin star motorcycle?
    check the owners manual


    cr125 all dayWhats the oil capacity for a 1982 Honda twin star motorcycle?
    Engine oil cap. should be cast on the engine case near the dipstick opening. Tha dip stick should have 2 marks bottom is add top is full with motorcycle straight up %26amp; level, dipstick screwed in.

    How much should I expect to pay for an oil change and new front and rear brakes on my motorcycle?

    I have a 1994 Suzuki Intruder 800. I bought it earlier this summer, probably should have gotten this done already but havn't. How much should I expect to pay for an oil change and also for front and rear brakes?How much should I expect to pay for an oil change and new front and rear brakes on my motorcycle?
    avarage $200 , depends on where you live also if you have connections with a private mechanic


    How much should I expect to pay for an oil change and new front and rear brakes on my motorcycle?
    For parts you can estimate around $20 for the oil and filter.


    Maybe around $90 to $150 for pads. Of course, those estimates vary depending on the price markup and the brand that is used for these parts.





    So, for parts you have, let's say; around $120. Most shops charge in the $50-$75/hour labor range. Let's go with something in the middle; $60/hour.





    The oil change will take about 1/2 hours ($30 labor). The pads shouldn't take much more than one hour ($60).





    So, add that up. $120 parts plus $90 labor gives up a bill of about $210.





    Both are pretty easy to do yourself. A few internet searches should provide you with some good helpful hints on doing the job yourself.





    Good luck. Ride safe.
    way more than you might think sorry ... do it yourself way cheaper and then you know how to care for it all in the same time... best you learn how to keep it running when you can do most of it yourself oil and brake is right so easy as tune up is.....call the dealer and get a shock... then go dealer and pick up new brake pads and oil and filter.. i can see your face now... saying how much you say what the
    These are definitely do it yourself tasks. It's easy too because it's the same process as changing the oil %26amp; filter on a car. Same as brakes. Wrenching is just as enjoyable as riding.





    Maintenance wrenching not repair wrenching.

    What happens if you put 2-stroke motor oil in a 4-stroke motorcycle?

    This would be a very bad thing to do !!!





    2 stroke oil is degined to be mixed with Petrol, usually at a ratio of 50:1, and the oil within the petrol libricates the cylinders as it combusts. It is totally different to 4 stroke motor oil which sits in a sump and is circulated around the engine to lubricate it.





    2 stroke is thinner than 4 stroke.





    OwenWhat happens if you put 2-stroke motor oil in a 4-stroke motorcycle?
    I suspect you take your engine to bits and clean it.What happens if you put 2-stroke motor oil in a 4-stroke motorcycle?
    You get a new motorcycle after you burn up the crank bearings and sieze the engine.

    What problems could occur by using olive oil to lubricate an automobile/motorcycle engine?

    it wont work very well it can burn easily and it can also go off so it's lubricating qualities will change. it is also a lot more viscose then mineral motor oil so it wont stick it the were it needs to to be an effective motor lubricant.What problems could occur by using olive oil to lubricate an automobile/motorcycle engine?
    you will burn the engine up. olive oil is for cooking

    What problems could occur by using olive oil to lubricate an automobile/motorcycle engine?

    What problems will occur?


    In short order, some component in the engine will fail, destroying the engine.


    I suspect this will take less than an hour.


    Olive oil is not to be used as an engine lubricant.


    Save it for making some basil pesto.What problems could occur by using olive oil to lubricate an automobile/motorcycle engine?
    Engine oil is made to create a barrier to keep metal from touching metal. It's viscosity and stabilizers make it able to handle high heat and close tolerance. Olive oil will boil off and leave 0 protection. Not to mention make a mess of anything that doesn't actually break.





    Save it for the chicken pesto.What problems could occur by using olive oil to lubricate an automobile/motorcycle engine?
    there is a phrase in my country Oils ant Oils





    I own 5 classic Motorcycles and a 1964 220SB Mercedes Benz





    and after doing my homework i can use GTX but not GTX 2 or 3 why because of the low to no Zinc in the make up of the Oil





    olive oil caster oil is just oil Motor oil is Not just oil





    shell racing is also better for older Engines has the highest ratio of Zinc


    it is not just the oil it is also the additives that give engine protection





    wrong oil higher fuel consumption Bearings failure and Piston overheating
    Some older motorcycles (and First World War aircraft) used a total loss system, rather than olive oil they used castor oil 鈥?the total loss system meant the riders and pilots got to inhale the used castor oil with unfortunate results.
    Olive oil smokes and then becomes sticky at relatively low temperatures. Don't put it in machinery, and don't cook with it.
    Loss of viscosity and engine failure
  • soap opera
  • Can chain-saw bar and chain oil be used on motorcycle drive chains?

    . . . despite chain-saw chain oilers being fully automatic, and the chains usually operating at lower speeds than those on motorcycles; but the lubrication principle being essentially the same (i.e., all the steel link plates wearing on steel pins or tubes with every rotation of the chain) and some after market fully automated oilers being available for motorcycle chains. Some oil does momentarily fling off of chain saw chains when they are operated at high speed and under no load.Can chain-saw bar and chain oil be used on motorcycle drive chains?
    Messy stuff.


    The thickeners they use to help keep it from flinging off saw bars tends to make the oil sticky. It's so sticky that it makes spiderwebs between the chain and sprocket when you spin the wheel.


    It works, but it's messy. Worse than the recommended gear oil.Can chain-saw bar and chain oil be used on motorcycle drive chains?
    I tend to use used sump oil on my chainsaw bar because there's a different set of dynamics involved when cutting down a tree compared to transmitting horsepower to the ground. I wouldn't use used sump oil on a motorcycle chain - too full of gunk. Don't forget, a chainsaw chain also runs against the bar, which a motorcycle chain doesn't,and, actually, a roller chain is a slightly more complicated piece of technology than a chainsaw chain. The oil-flinging thing is also a big factor; the last thing you want is oil on your back wheel. In, short, the answer to your question would be ';no';, I suspect.
    You can but why not use the correct stuff in the first place? Chain wax will prelong your chain's life a lot better.
    many chains have ';0'; rings or ';X'; rings that seal the inner chain roller, using regular oil will damage those rubber ';0'; or ';X'; rings, I suggest using an approved chain lube, or chain wax
    Always worked for me, (had three bikes). Don't put it on too heavy. It is real clingy/sticky so it won't ';fling off'; unless you put too much on.

    What problems could occur by using olive oil to lubricate an automobile/motorcycle engine?

    it wont work very well it can burn easily and it can also go off so it's lubricating qualities will change. it is also a lot more viscose then mineral motor oil so it wont stick it the were it needs to to be an effective motor lubricant.What problems could occur by using olive oil to lubricate an automobile/motorcycle engine?
    you will burn the engine up. olive oil is for cooking

    What happens if you put 2-stroke motor oil in a 4-stroke motorcycle?

    This would be a very bad thing to do !!!





    2 stroke oil is degined to be mixed with Petrol, usually at a ratio of 50:1, and the oil within the petrol libricates the cylinders as it combusts. It is totally different to 4 stroke motor oil which sits in a sump and is circulated around the engine to lubricate it.





    2 stroke is thinner than 4 stroke.





    OwenWhat happens if you put 2-stroke motor oil in a 4-stroke motorcycle?
    I suspect you take your engine to bits and clean it.What happens if you put 2-stroke motor oil in a 4-stroke motorcycle?
    You get a new motorcycle after you burn up the crank bearings and sieze the engine.

    What problems could occur by using olive oil to lubricate an automobile/motorcycle engine?

    What problems will occur?


    In short order, some component in the engine will fail, destroying the engine.


    I suspect this will take less than an hour.


    Olive oil is not to be used as an engine lubricant.


    Save it for making some basil pesto.What problems could occur by using olive oil to lubricate an automobile/motorcycle engine?
    Engine oil is made to create a barrier to keep metal from touching metal. It's viscosity and stabilizers make it able to handle high heat and close tolerance. Olive oil will boil off and leave 0 protection. Not to mention make a mess of anything that doesn't actually break.





    Save it for the chicken pesto.What problems could occur by using olive oil to lubricate an automobile/motorcycle engine?
    there is a phrase in my country Oils ant Oils





    I own 5 classic Motorcycles and a 1964 220SB Mercedes Benz





    and after doing my homework i can use GTX but not GTX 2 or 3 why because of the low to no Zinc in the make up of the Oil





    olive oil caster oil is just oil Motor oil is Not just oil





    shell racing is also better for older Engines has the highest ratio of Zinc


    it is not just the oil it is also the additives that give engine protection





    wrong oil higher fuel consumption Bearings failure and Piston overheating
    Some older motorcycles (and First World War aircraft) used a total loss system, rather than olive oil they used castor oil 鈥?the total loss system meant the riders and pilots got to inhale the used castor oil with unfortunate results.
    Olive oil smokes and then becomes sticky at relatively low temperatures. Don't put it in machinery, and don't cook with it.
    Loss of viscosity and engine failure

    Can chain-saw bar and chain oil be used on motorcycle drive chains?

    . . . despite chain-saw chain oilers being fully automatic, and the chains usually operating at lower speeds than those on motorcycles; but the lubrication principle being essentially the same (i.e., all the steel link plates wearing on steel pins or tubes with every rotation of the chain) and some after market fully automated oilers being available for motorcycle chains. Some oil does momentarily fling off of chain saw chains when they are operated at high speed and under no load.Can chain-saw bar and chain oil be used on motorcycle drive chains?
    Messy stuff.


    The thickeners they use to help keep it from flinging off saw bars tends to make the oil sticky. It's so sticky that it makes spiderwebs between the chain and sprocket when you spin the wheel.


    It works, but it's messy. Worse than the recommended gear oil.Can chain-saw bar and chain oil be used on motorcycle drive chains?
    I tend to use used sump oil on my chainsaw bar because there's a different set of dynamics involved when cutting down a tree compared to transmitting horsepower to the ground. I wouldn't use used sump oil on a motorcycle chain - too full of gunk. Don't forget, a chainsaw chain also runs against the bar, which a motorcycle chain doesn't,and, actually, a roller chain is a slightly more complicated piece of technology than a chainsaw chain. The oil-flinging thing is also a big factor; the last thing you want is oil on your back wheel. In, short, the answer to your question would be ';no';, I suspect.
    You can but why not use the correct stuff in the first place? Chain wax will prelong your chain's life a lot better.
    many chains have ';0'; rings or ';X'; rings that seal the inner chain roller, using regular oil will damage those rubber ';0'; or ';X'; rings, I suggest using an approved chain lube, or chain wax
    Always worked for me, (had three bikes). Don't put it on too heavy. It is real clingy/sticky so it won't ';fling off'; unless you put too much on.

    How often should i lubricate my motorcycle chain and when to do an oil change / tune up?

    what is the best lubricant for the chain and how often should i do a tune upHow often should i lubricate my motorcycle chain and when to do an oil change / tune up?
    id say change oil every 1000 miles, tune up at 4000 and lube the chain every 300 or 400 miles.How often should i lubricate my motorcycle chain and when to do an oil change / tune up?
    I use Protech chain lube ,most white grease sprays will work and you should lube it when you see it is dry or after washing your bike and as far as a tune up it really depends on you ,your bike and amount of riding time ,I would suggest early spring and then in the middle of the summer at least .I would also suggest cleaning the chain periodically then respraying as to prevent sand and dirt build up from ruining the chain
  • soap opera
  • How often should I change the oil in my 92 nighthawk 750 motorcycle?

    A good rule is every 500 miles per cylinder. 4 cylinders is every 2000 miles. But since you have an oil filter 3000 should work. If you don't like to change the oil to often use the synthetic stuff. If the bike is burning a little stay with the regular stuff. I always use Castrol in my truck and Bel-Ray in my bikes. Both are synthetic. By the way, change the filter every time you change the oil or at least every other time you change the oil as a minimum.How often should I change the oil in my 92 nighthawk 750 motorcycle?
    Change oil and filter every 3-4 thousand miles. Use a good quality oil that's formulated for motorcycle engines. If you use synthetic motor oil, like Mobil-1, then you can stretch out your oil changes to 5-6 thousand miles.How often should I change the oil in my 92 nighthawk 750 motorcycle?
    I had an 1978 750F Super Sport for 10 years.I changed the oil every 3 thousand miles, along with the filter.I used Castrol 10w40 the whole time I owned it and she had 87,000 miles on her and the engine was never touched except for valve adjustments which I did every year.I kicked myself for selling her but I needed the money.

    Can i safely add stp or another viscosity booster to the motorcycle oil in my automatic clutch atv?

    No! Don't add any additives to your oil unless they are specifically made for motorcycles... Even if they are motorcycle specific I would be a little wary.


    Motorcycle/atv engines are different than car motors since the same oil lubes the motor and the clutch.


    Use a quality oil and change it when your supplsed to and theres no need for any additives.Can i safely add stp or another viscosity booster to the motorcycle oil in my automatic clutch atv?
    it would be a very bad idea. if u want to wind up having to have the clutch rebuilt way before its time, go for it....but it would be a very expensive bill.

    What is the best motorcycle superbike oil?

    castrol r4 superbike oilWhat is the best motorcycle superbike oil?
    All name brand oils are good.





    If you go synthetic it lasts longer and costs more





    If you go conventional it must be change at 3K miles but costs 1/2 as much.





    The oil is much less important than most think. the important part is changing it when needed.





    Asking what oil is the best is just asking opinions. no one really knows which is best and today the oils out last the recommended changing intervals so which oil last when run dry or in worst case really does not matter.





    I use Modile 1 in everything I own from my bikes, truck and Vett. I do this because I know it is good oil and i want the same for all vehicles. Makes life easier.What is the best motorcycle superbike oil?
    STOP SPAMING WITH THE ';BIKERKISS'; ADVERTISING
    O.K. you need to understand the difference in the weights of oil out there and most of the explain to you what their range is.





    eg: 5W - 50 might be what you use! The 5 denotes the temperature range that your oil will work best in! ie: 10 degrees celius to 40 degrees celius!


    The 50 has to do with what the oil has in it, but most of we need to know is on the front of the bottle.





    Synthetic oil offers probably the best protection for your RUN IN ENGINE as it has better lubricity properties!


    It will never be suggested to you to run in a brand new engine with full synthetic oil as it will never get the chance to bed the engine in!


    There are also detergents that keep your engine oil clean, to prevent gumming up of parts and oil galeries.








    But to us, the most important thing to look for is that you follow what type of oil you use for your given area ie: temperature range and consider using synthetic to prolong the life of your engine!





    Don't let yourself think though that you can extend the life of your oil change by using synthetic!





    If you don' trust the mechanic to put the oil in you want, do it yourself. It's easy and if you don't know, ask a few people and they will be more than willing to hepl you out. The filter gets done at the same time as well. Don't skip it!








    Troy.
    LOOK INTO ROYAL PURPLE BECAUSE IT WORKS GREAT IN ALL OF MY VEHICLES.

    Will a classic motorcycle seize up if i store it without oil?

    I am looking to buy a classic motorcycle, to maybe ride 2 or 3 times a year, but the only place i can store it is in a self storage facility and they want me to drain oil and petrol from the bike. Is this going to cause any problems?Will a classic motorcycle seize up if i store it without oil?
    Use fuel stabilizer and drain the carb(s) when it's going to be stored for a while. If it has a battery, take it home with you and connect it to a Battery Tender or similar charger. Draining the oil should not be a problem. The viscosity of the oil will make it cling to all parts, forming a protective coating. A bit of oil in the spark plug holes will keep the piston rings from rusting to the bore(s).


    When restarting it after a long break, I would refill the oil first, turn the engine over a few times to spread it around (easily done with the spark plugs removed), and then add the gas and start it up.Will a classic motorcycle seize up if i store it without oil?
    Like the others have said, as long as you put a little bit of oil down the spark plug holes you will not have any problems with the engine seizing. Enough oil should remain on the bearings to prevent any problems.





    I do see a potential problem though.





    On a motorcycle with a metal fuel tank they should be stored with a full tank of fuel. This is because condensation can build up in an empty fuel tank and cause rust. So watch for rust inside the fuel tank.





    However if the storage facility is climate controlled there will be less possibility of rust inside the fuel tank as the temperature will be more stable and you will have less condensation.
    My first reaction was ';Drain the petrol but not the oil'; but now I think of it, I can't see any problems with draining the oil too. The oil will drain down out of the engine regardless and whether it lays in the sump (or tank if its a dry sump bike), or the sump is empty, it would make no difference that I can think of.


    The only problem I can think of is that the oil pump will also be empty, so you would have to turn the engine over a few times before starting it, each time you filled it back up again, but this is no different to changing the oil during a routine maintenance. Probably wouldn''t hurt to put a teaspoon of oil in each cylinder before storage too.


    What bike are you getting?
    A solution used by some people in military going to Iraq and the old classic storage for winter- Run motor unti fully warmed, stop engine, drain gas tank, add gallon of kerosene to gas tank and start engine again until smoking good and or engine dies. drain gas tank and engine oil as storage area requires. Another way is use of 'fogging oil' for storage- run engine and spray in carb or air cleaner unti engine dies. In both cases you have coated air intake, carb bowls and jets, valve stems and guides, cylinder walls with light oil mix. when you get it back out of storage in less than a year you'll need to clean plugs and put in fresh gas, new oil anyway, trickle battery. A couple shots of gasoline in aircleaner and try starting, will smoke a bit but should run fairly good after couple miles. Carb bowl drain may be needed- old Amal equiped BSA and Triumphs just needed plunger button down 10 seconds, a second retry if engine sputtered and died in 30 seconds. This if fuel tank wasn't shut off while engine ran to drain bowls.
    Potentially yes it will but it does depend on the type of storage you are keeping it in. The biggest danger after storing it 'dry' is that any condensation there might be, settles on the parts that need oil and rust sets in. It's never advisable to have no oil in an engine at all. If you have no other option than to store it like this then I'd change the oil that's already in, add something like slick 50, and give it a good run before draining the oil. Once you are ready to store it spray wd40 all over the engine to expel any moisture and leave the engine uncovered so the air can get around it. Hope this helps
    1 . Petrol - just draining it will be a nightmare when you come to use it again as deposits will form from the bits of fuel left and gum up the carbs. You would have to completely make sure no petrol was left in it.


    2. The engine will actually rust internally if left with no oil for long. Some engines can seize if left like this. needs to have normal oil in all the time and turned over although not started every week.





    Unless you can find a more friendly place to keep it I would not bother.
    Yes, the motorcycle should be fine in a self storage unit. At least in a good one anyway. I use storage deluxe for my cars and boats and I have never had a problem. They have a climate control system for each unit and that really helps. You should look them up and see twhat they have to offer. They come highly recommended.
    I've got a couple of bikes in storage and as long as you have a dry storage area, your bike will be OK without oil for several months.





    A good idea is to put some oil (1 tablespoon) in the cylinders through the spark pugs holes before storing.
    why drain the oil?


    fuel sure can do that but can just add fuel stabizer really dont see a need to buy a bike if you not going to ride it all one can mine i ride if it starts and theres no rain if you going to ride three times a year rent a bike
    In short yes, as long as you turn it over occasionally you can drain it or not drain it
    WHEN U DRAIN OIL FROM THE ENGIEN THEN ENGIEN WILL START TO CORRODE FROM BEARINGS ANS OKTHER PARTS. SAFE SIDE TO KEEP THAT WITH OIL AND BEFORE STARTING DRAIN IT AND USE NEW OIL.

    How difficult is it to put new oil seals on the front fork of a motorcycle, and what seals would I need to buy

    The bike is a 1987 Yamaha FZ750 with 20,000 miles. The forks are not real soft, but leaking oil and getting worse.How difficult is it to put new oil seals on the front fork of a motorcycle, and what seals would I need to buy
    not hard at all you will need to buy a tool to seat the sealHow difficult is it to put new oil seals on the front fork of a motorcycle, and what seals would I need to buy
    yea its ot hard at all
    I found that I couldn't do fork seals without air tools.
    easy.. go here %26amp; learn.. tells you how to do all sorts of stuff bike related..


    http://www.dansmc.com/MC_repaircourse.ht鈥?/a>

    How much oil do I need when changing oil on a custom 750 Honda motorcycle? What's the best oil to use?

    If it's a standard Honda 750 in-line 4 cyl engine, it should take about 3.8 quarts of oil. It would help to know what year the bike is.


    As far as oil is concerned, I'd use Amsoil 10w 40 Motorcycle oil.


    http://www.amsoil.com/How much oil do I need when changing oil on a custom 750 Honda motorcycle? What's the best oil to use?
    The exact number depends on which model, but I've owned three Hondas from 500 to 1000 ccs, and they all took between four and five quarts at oil and filter change.





    My favorite oil for Hondas is Mobile1 20W-50 Extended Performance. I change once a year at the end of the riding season.





    Just don't use any oil that is ';Energy Conserving.'; Such oils contain ';moly,'; which is rumored to adhere to wet clutches and make them slip, although there is some debate on that.How much oil do I need when changing oil on a custom 750 Honda motorcycle? What's the best oil to use?
    quantity depends on the model but I'd say any good quality 10w/40 oil would be fine.
    Buy 4 quarts.


    It takes more than 3 and less than 4


    Any brand name motor oil is fine.


    10w 40 in cold weather.


    20w 50 in warm weather.
    If it's an early SOHC 750, that would depend on the oil tank size.
    ';Read the Manual, Luke.';
  • soap opera
  • What oil do you really need for motorcycle engines?

    Is there really a difference in motorcycle oil vs car oil? What is it?What oil do you really need for motorcycle engines?
    A big difference is wet clutch compatibility, as well as shearing of oil in the transmission. check out Amsoil: http://www.amsoil.com/redirect.cgi?zo=14鈥?/a>What oil do you really need for motorcycle engines?
    Motorcycle oil and automobile oil come from the same factories, they just have different labelling. Quality oil is quality oil and it's refined in exactly the same manner.





    Get a motor oil without friction modifiers, moly, or anything that says 'energy conserving' as it can cause clutch slippage. Otherwise you can use any reputable brand of motor oil that matches the grade mentioned in your owners manual.





    Ride Safe!
    Some mc oils have more sulfur and other additives to carry off heat. I don't know that its a factor, what with liquid cooled engines and the modern metallurgical techniques used in the manufacture of air cooled bikes.








    You can use automotive oil as long as it doesn't have friction modifiers. 10W40 and heavier usually don't. DO NOT use auto oil if the circle on the back label has ';Saves Energy'; or similar words.





    Most important is regular oil changes.
    I use 20w-50 in my Harley


    yes motorcycle oil is way thicker.......


    cars need thinner oil to properly circulate.


    motorcycles don't run in winter so they use thicker oil and have smaller engines.....hope that helps
    just make sure you check that the rating (SJ SL etc.) matches what your bike calls for and that it does not say energy conserving, as that type and wet clutches do not go well together and will cause the clutch to slip
    The only difference is the marketing and the price. Good quality oil is good quality oil. Just use the weight that the manufacturer recomends


    Now realize, I'm gonna get blasted for saying this but I'm used to it.
    Patriot and chyenne have it right.


    The oils are different. Why not spend a dollar more a quart and run what the manufactures spend millions testing in their motors. base stocks may come from a similar source but the additive packages are added buy the indvidual





    cars use thinner oils today because the motors have tighter tolerences Google oil viscosities and you will learn more
    m/c oil is formulated for higher temperatures specifically found in motorcycles. you can get by in an emergency but always use m/c oil in a mc
    I use Castrol, the same stuff that goes into cars. 10w30 in the winter; mix of 10w40 and 20w50 in the summer.


    My motorcycle is a 1985 Yamaha Virago 700 with about 80,000 miles on it.





    Don't put in the stuff with ';slick'; additives.
    Motorcycles don't run in winter? HAH! In Kansas they do...anyway, the oil question...it's not as much about heat, it's about shear factors...shearing takes place in the transmission, which on many bikes is lubricated by the same oil as the engine. (Harley owners, disregard this) As oil passes between the gear faces, which develop tremendous pressure during acceleration, the molecular chains in the oil molecules actully get cut, or ';sheared';. Motorcycle oils are formulated to have longer molecular chains and thus hold up better in this application. Brand isn't as important as formulation. I've run Jap bikes since 1978 and always used Hondalube GN-4 with excellent results...K ;o)
    just checked the repair manual for my kawasaki. after the '01 model, it says the newer auto oils are ok as long as they aren't marked energy conserving, but 2000 and earlier required m/c oil only. best to check your specific manual to see. i'll be using automotive oil in mine from now on and pocketing the savings.


    gary

    What is the oil capacity of a 1990 yamaha xt350 dual sport motorcycle?

    I changed my oil last night, though couldnt find anything in the owners manual telling me how much oil to use.What is the oil capacity of a 1990 yamaha xt350 dual sport motorcycle?
    does it have a dipstick?